Application overview

Sheet metal processing is called sheet metal processing. Specific examples include the use of sheet metal to make chimneys, iron drums, fuel tanks, ventilation pipes, elbows, rounds, funnels, etc.


Suitable metals for fiber laser cutting machine

Would you like more information about fiber laser cutting machine?

Contact Us

Which metal products do you want to make?

Which metal products do you want to make?

Examples of applications

Carbon steel is used in a large number of various sheet metal processing for the production of various machinery,equipment,components,etc.Fiber laser cutting machine cuts carbon steel with high speed and high precision, so it is more and more widely used in carbon steel processing.

Industrial laser cutting: examples of applications

What is the point of buying a laser for industrial metal cutting?

  • Carbon steel cutting is one of the metal cutting machines. Due to the material properties of carbon steel, IPG, Raycus and Maxphotonics lasers can be used to cut out good results.Tianchen laser cutting machine can cut any design pattern on carbon steel sheet. Fast, high precision,one-shot molding, no need for subsequent processing. No need for mold, cost saving, visible material discharge, close fit, saving materials.


    Contact Us

Function and advantages of laser technology

Tianchen laser product recommendations

The advantages of laser cutting machine for cutting carbon steel:

1. cutting speed is fast
  Continuous, fast curve cutting and short machining path optimization greatly increase work efficiency.
2. the cutting surface is smooth, no burr
  The cutting quality is good, the slit is small, the deformation is small, the cutting surface is flat and beautiful, and it can be used as the last processing step without subsequent processing.
3. stability improvement
  The output power of the device is stable, the laser has a long service life, the maintenance is relatively simple, and the operation is relatively simple.
4. CNC system software is powerful
  The drawings that need to be cut can be designed on the computer, and then poured into the system of the device for immediate processing, flexible work, high efficiency, simple and convenient operation.


See more features

Three common problems when cutting carbon steel

1. When the laser cuts carbon steel, the workpiece has burrs
Generally, the workpiece is burred. Possible reasons include:
(1) The laser focus position is offset, and the focus position test is performed, and the offset is adjusted according to the offset of the laser focus;
(2) The output power of the laser is not enough. It is necessary to check whether the work of the laser generator is normal. If it is normal, observe whether the output value of the laser control button is correct, if it is not adjusted properly;
(3) The cutting line speed is too slow, and it is necessary to increase the line speed during operation control;
(4) The cutting gas is not pure enough to provide high quality cutting working gas;
(5) The instability of the machine running time is too long. At this time, it needs to be shut down and restarted.

2. The laser is not completely cut The reason why the laser is not completely cut:
(1) The selection of the laser nozzle does not match the thickness of the processing plate, and the nozzle or processing plate is replaced;
(2) The laser cutting line speed is too fast, and the operation control is required to reduce the line speed.

3. Abnormal sparks occur when cutting low carbon steel When the low carbon steel is cut normally, the fire bouquet is long, flat, and has fewer splits. The occurrence of abnormal sparks will affect the smoothness and quality of the cut section of the workpiece. In this case, if other parameters are normal, the following should be considered:
(1) The laser head nozzle has serious loss, and the nozzle should be replaced in time;
(2) In the case of no new nozzle replacement, the working gas pressure should be increased;
(3) If the thread at the connection between the nozzle and the laser head is loose, the cutting should be suspended immediately, check the connection state of the laser head, and re-thread the thread.